| SIMATIC S7-1500, Front connector Screw-type connection system, 40-pole for 35 mm wide modules incl. 4 potential bridges, and cable ties |
General information |
Product type designation | Front connector |
Connection method |
Connection I/O signals |
Connection method | Screw terminals |
Number of lines per connection | 1; or combination of 2 conductors of up to 1.5 mm² (total) in a shared ferrule |
Conductor cross-section in mm² |
— Connectable cable cross-sections for massive cables, min. | 0.25 mm² |
— Connectable cable cross-sections for massive cables, min. | 1.5 mm² |
— Connectable cable cross-sections for flexible cables without end sleeve, min. | 0.25 mm² |
— Connectable cable cross-sections for flexible cables without end sleeve, max. | 1.5 mm² |
— Connectable cable cross-sections for flexible cables with end sleeve, min. | 0.25 mm² |
— Connectable cable cross-sections for flexible cables with end sleeve, max. | 1.5 mm² |
Conductor cross-section acc. to AWG |
— Connectable cable cross-sections for massive cables, min. | 24 |
— Connectable cable cross-sections for massive cables, min. | 16 |
— Connectable cable cross-sections for flexible cables without end sleeve, min. | 24 |
— Connectable cable cross-sections for flexible cables without end sleeve, max. | 16 |
— Connectable cable cross-sections for flexible cables with end sleeve, min. | 24 |
— Connectable cable cross-sections for flexible cables with end sleeve, max. | 16 |
Wire end processing |
— Stripped length of cables, min. | 10 mm |
— Stripped length of cables, max. | 11 mm |
— End sleeve acc. to DIN 46228 without plastic sleeve | Form A, 10 mm and 12 mm long |
— End sleeve acc. to DIN 46228 with plastic sleeve | Form E, 10 mm and 12 mm long |
Mounting |
— Tool | Screwdriver, conical design, 3 mm to 3.5 mm |
— Tightening torque, min. | 0.4 N·m |
— Tightening torque, max. | 0.7 N·m |
Dimensions |
Width | 29.8 mm |
Height | 130.5 mm |
Depth | 46 mm |
Weights |
Weight, approx. | 123 g |
last modified: | 03/13/2019 |