Op Temp (C) Top-Side Markings (3) (4) LM20124MH/NOPB ACTIVE HTSSOP PWP 16 92 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHE/NOPB ACTIVE HTSSOP PWP 16 250 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHX/NOPB ACTIVE HTSSOP PWP 16 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 20124 MH (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br)
l material MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) (6) LM20124MH/NOPB ACTIVE HTSSOP PWP 16 92 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHE/NOPB ACTIVE HTSSOP PWP 16 250 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHX/NOPB ACTIVE HTSSOP PWP 16 2500 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 20124 MH (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS sub
Op Temp (C) Top-Side Markings (3) (4) LM20124MH/NOPB ACTIVE HTSSOP PWP 16 92 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHE/NOPB ACTIVE HTSSOP PWP 16 250 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHX/NOPB ACTIVE HTSSOP PWP 16 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 20124 MH (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br)
Op Temp (C) Top-Side Markings (3) (4) LM20124MH/NOPB ACTIVE HTSSOP PWP 16 92 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHE/NOPB ACTIVE HTSSOP PWP 16 250 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHX/NOPB ACTIVE HTSSOP PWP 16 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 20124 MH (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br)
2) (6) (3) Op Temp (C) Device Marking (4/5) LM20124MH/NOPB ACTIVE HTSSOP PWP 16 92 Green (RoHS & no Sb/Br) SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHE/NOPB ACTIVE HTSSOP PWP 16 250 Green (RoHS & no Sb/Br) SN Level-1-260C-UNLIM -40 to 125 20124 MH LM20124MHX/NOPB ACTIVE HTSSOP PWP 16 2500 Green (RoHS & no Sb/Br) SN Level-1-260C-UNLIM -40 to 125 20124 MH (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all
3, 2007 LM20124 Connection Diagram 30014202 Top View eTSSOP-16 Package Ordering Information Order Number Package Type NSC Package Drawing Package Marking LM20124MH eTSSOP-16 MXA16A 20124MH Supplied As 92 Units of Rail LM20124MHE 250 Units of Tape and Reel LM20124MHX 2500 Units of Tape and Reel Pin Descriptions Pin # Name Description 1 SS/TRK Soft-Start or Tracking control input. An internal 5 A current source charges an external capacitor to set the Soft-Start ramp rate. If driven by a external source less than 800mV, this pin overrides the internal reference that sets the output voltage. If left open, an internal 1ms Soft-Start ramp is activated. 2 FB Feedback input to the error amplifier from the regulated output. This pin is connected to the inverting input of the internal transconductance error amplifier. An 800 mV reference connected to the noninverting input of the error amplifier sets the closed loop regulation voltage at the FB pin. 3 PGOOD 4 COMP 5,16 NC 6,7 PVIN Power good output signal
1, 2007 LM20124 Connection Diagram 30014202 Top View eTSSOP-16 Package Ordering Information Order Number Package Type NSC Package Drawing Package Marking LM20124MH eTSSOP-16 MXA16A 20124MH Supplied As 92 Units of Rail LM20124MHE 250 Units of Tape and Reel LM20124MHX 2500 Units of Tape and Reel Pin Descriptions Pin # Name Description 1 SS/TRK Soft-Start or Tracking control input. An internal 5 A current source charges an external capacitor to set the Soft-Start ramp rate. If driven by a external source less than 800mV, this pin overrides the internal reference that sets the output voltage. If left open, an internal 1ms Soft-Start ramp is activated. 2 FB Feedback input to the error amplifier from the regulated output. This pin is connected to the inverting input of the internal transconductance error amplifier. An 800 mV reference connected to the noninverting input of the error amplifier sets the closed loop regulation voltage at the FB pin. 3 PGOOD 4 COMP 5,16 NC 6,7 PVIN Power good output signal
6, 2008 LM20124 Connection Diagram 30014202 Top View eTSSOP-16 Package Ordering Information Order Number Package Type NSC Package Drawing Package Marking LM20124MH eTSSOP-16 MXA16A 20124MH Supplied As 92 Units of Rail LM20124MHE 250 Units of Tape and Reel LM20124MHX 2500 Units of Tape and Reel Pin Descriptions Pin # Name Description 1 SS/TRK Soft-Start or Tracking control input. An internal 5 A current source charges an external capacitor to set the Soft-Start ramp rate. If driven by a external source less than 800mV, this pin overrides the internal reference that sets the output voltage. If left open, an internal 1ms Soft-Start ramp is activated. 2 FB Feedback input to the error amplifier from the regulated output. This pin is connected to the inverting input of the internal transconductance error amplifier. An 800 mV reference connected to the noninverting input of the error amplifier sets the closed loop regulation voltage at the FB pin. 3 PGOOD 4 COMP 5,16 NC 6,7 PVIN Power good output signal
er 2007 LM20124 Connection Diagram 30014202 Top View eTSSOP-16 Package Ordering Information Order Number Package Type NSC Package Drawing Package Marking LM20124MH eTSSOP-16 MXA16A 20124MH Supplied As 92 Units of Rail LM20124MHE 250 Units of Tape and Reel LM20124MHX 2500 Units of Tape and Reel Pin Descriptions Pin # Name Description 1 SS/TRK Soft-Start or Tracking control input. An internal 5 A current source charges an external capacitor to set the Soft-Start ramp rate. If driven by a external source less than 800mV, this pin overrides the internal reference that sets the output voltage. If left open, an internal 1ms Soft-Start ramp is activated. 2 FB Feedback input to the error amplifier from the regulated output. This pin is connected to the inverting input of the internal transconductance error amplifier. An 800 mV reference connected to the noninverting input of the error amplifier sets the closed loop regulation voltage at the FB pin. 3 PGOOD 4 COMP 5,16 NC 6,7 PVIN Power good output signal
6, 2008 LM20124 Connection Diagram 30014202 Top View eTSSOP-16 Package Ordering Information Order Number Package Type NSC Package Drawing Package Marking LM20124MH eTSSOP-16 MXA16A 20124MH Supplied As 92 Units of Rail LM20124MHE 250 Units of Tape and Reel LM20124MHX 2500 Units of Tape and Reel Pin Descriptions Pin # Name Description 1 SS/TRK Soft-Start or Tracking control input. An internal 5 A current source charges an external capacitor to set the Soft-Start ramp rate. If driven by a external source less than 800mV, this pin overrides the internal reference that sets the output voltage. If left open, an internal 1ms Soft-Start ramp is activated. 2 FB Feedback input to the error amplifier from the regulated output. This pin is connected to the inverting input of the internal transconductance error amplifier. An 800 mV reference connected to the noninverting input of the error amplifier sets the closed loop regulation voltage at the FB pin. 3 PGOOD 4 COMP 5,16 NC 6,7 PVIN Power good output signal
6, 2008 LM20124 Connection Diagram 30014202 Top View eTSSOP-16 Package Ordering Information Order Number Package Type NSC Package Drawing Package Marking LM20124MH eTSSOP-16 MXA16A 20124MH Supplied As 92 Units of Rail LM20124MHE 250 Units of Tape and Reel LM20124MHX 2500 Units of Tape and Reel Pin Descriptions Pin # Name Description 1 SS/TRK Soft-Start or Tracking control input. An internal 5 A current source charges an external capacitor to set the Soft-Start ramp rate. If driven by a external source less than 800mV, this pin overrides the internal reference that sets the output voltage. If left open, an internal 1ms Soft-Start ramp is activated. 2 FB Feedback input to the error amplifier from the regulated output. This pin is connected to the inverting input of the internal transconductance error amplifier. An 800 mV reference connected to the noninverting input of the error amplifier sets the closed loop regulation voltage at the FB pin. 3 PGOOD 4 COMP 5,16 NC 6,7 PVIN Power good output signal